- Process Name:
- Scale/Offset
- Synopsis:
- Scale and Offset Signal Transform
- Process Types:
-
Building Block
- Channels:
- 1
- Description:
- Scale/Offset is used to apply an affine transformation to the input signal on a
sample by sample basis. This can be used to suitably scale and offset control
signals used as audio-rate controls for blocks that accept such signals, or it can be
used to set scale and bias on signals before they are driven into non-linear elements.
The added DC bias can be used to condition the waveshaping applied by the nonlinear
signalprocessing blocks. The remaining DC offset can be removed by another Scale/Offset instance, or by
using a DC-Block filter.
- Parameters:
- Scale [-5, 5]
-
Gain applied to input signal.
- Offset [-1, 1]
-
DC-Offset added to the scaled input signal.
- Master Bypass {On, Off}
-
When engaged, the process block is hard-bypassed, and the output signal
is the same as the input signal.
- See also:
-
Documentation Copyright © 2005, Metric Halo. All rights reserved.
